After my crafty funk last week, I seem to be on a roll. Here is a card I created for a few challenges:
I used the ‘Lovestruck Colorize‘ dies from Tim Holtz/Sizzix for this. The red and pink card stock is from Concord & 9th – three different tones of each. I did have to watch the Sizzix YouTube video to ensure I got the layers correct though…
Once the two hearts were layered and glued together, I dry embossed a white panel using a Spellbinders embossing folder – also with hearts – and arranged the red and pink hearts in a jaunty manner with 3D foam.
The foiled sentiment was added, and then some little sparkly sequins.
Hello there. I have had a little of a crafty funk this week, finding it difficult to create anything. I decided to sort out some of my craft room, add some new products to the CML app so I can keep track of them – which led me to find the wax seal kit my sister bought for me for Christmas 2022……that’s right, Christmas 2022 – and I have never played with it. I decided the time was right, so I had a play – and it is very addictive I must say. I think I created at least 15 wax seals, and I used a couple on this card:
I created some wax seals, then remembered a Yana Smakula video where she added the seals to some die cuts, so this is the result of my experiment with that technique.
I die cut some bluebells and other foliage from a couple of The Greetery die sets, and created the blooms, then placed them on the mat ready for the seal, added the wax, then the seal – and waited.
Once the wax had cooled, I removed the seal, and though the seal had trapped the die cuts quite well, you could see the stems through the seal. I was considering just adding more wax and sealing again, but instead I added another seal on top.
I knew I had the wax seal ribbon die so I hunted that out, die cut that in green, and added to the rear of the wax seal and flowers. The woodgrain card stock is from Lawn Fawn which I’ve had for ages, so that was used for the panel which the ribbon die could wrap around, then added to the white card base.
I find I am always a little late to try new ways of adding to my card making, but – like the hot foiling – this wax seal technique is going to be one of my favourites I think.
Hello there. I seem to be on a roll using products I have previously bought, but never used. I think I’m a collector – buy things ‘just in case’. I do eventually use them, but it might take me a while…….
Here is a card using a layering stencil from Pinkfresh Studio I have had for a little while:
I took the opportunity to use this set of stencils with the current colours for the Color Throwdown Challenge.
I had a piece of Vicki Boutin Foundation Paper I had taken out of the pad ready for a Distress Spray class yesterday, but never used, so I thought I would have a go and see how this card stock works with ink blending.
I used all the layers of the stencil, but I did use different tones of each colour on the same stencil. I would never have thought of doing that until I attended some Taylored Expressions and Pinkfresh Studio virtual events. Now I wonder why on earth I would think you have to use just the one colour on each layer is beyond me – but there you go…..we live and learn.
I used Pinkfresh inks as I have several colour families, and just inked it up. I am a little heavy handed when it comes to ink blending, so I made sure to dry each layer before moving on to the next stencil – another lesson learned…..
Once the panel was created, I used an older Mama Elephant slimline die to cut it out with a scallop and stitched edge, then adhered it to a Neenah card base.
The sentiment was chosen as it wouldn’t cover too much of the design, and I didn’t even add gems or sequins – that design really does stand for itself.
Hello everyone. I created this card and finally managed to use the matching stencils for this background I had in my stash from a previous foiling session:
I have this foil plate and matching stencils for a while, and had foiled the panel quite a few months ago, but hadn’t got around to using it. I used the opportunity with the current colours for The Color Throwdown.
Onto the silver foiled panel, I used all the layering stencils, and the three Distress Ink pads you see in the photo. I set this aside and die cut the arch from another white panel, then used a Stampin’ Up embossing folder to create the texture on it.
I wanted it to be almost like a stained glass window.
I then adhered the ink blended panel behind the arch aperture, using 3D foam to stick them to a card base.
The sentiment is also from a previous foiling session.
The ink blending took most of the time creating this card, but the choosing of the colours to use was easier as I have just finished swatching all my Distress Inks and Distress Oxides, so I can easily flip through the swatches to choose the colours.
I also realised there are 3 colours of Distress Inks I don’t currently have – that will be amended in the next couple of days….!
Hello again. I have created a card I would like to share with you:
I was inspired by the blue and the window/shutters of the Inspired By challenge, and used the arch window die from The Greetery. I wanted the window pane section to be separate from the arch itself, so I first die cut the arch using a Simon Says Stamp arch die set, then die cut the window panes inside that. I then die cut the panes again in a lighter blue and pieced them back in. All the card stock is from Concord & 9th.
The background was created using a Spellbinders stencil and ink blending the two Distress Inks you see in the photo, keeping the darker blue towards the bottom.
Once this was adhered to the card base, I added the window with 3D foam, die cut the flowers, and added them for a pop of colour.
The flowers and sentiment strip are both from Spellbinders.
I also added some glittery gems from Pinkfresh Studio to the centre of the smaller cluster of flowers.
Hello once again. I had some messy and inky play yesterday to create this card:
I first created the panel for the mug. I used a Simon Says Stamp snowflake stencil, and through that I put some Altenew paste onto water colour card. Whist that was drying, I took some Distress Heavy Kraft card stock, stamped and heat embossed the sentiment in white, then sprayed with Distress Oxides in two purple colours. Again – this was set aside to dry.
Once the white snowflake panel was dry, I took purple Distress Inks, and ink blended over the top. I wanted the snowflakes to catch the ink, but also to have some purple on the background for an almost grungy look, and to be able to see the pattern from the water colour card itself. I then die cut the mug shape using a Heffy Doodle die set.
The sentiment cup holder was wiped with a dry cloth to try and get the white sentiment back, then die cut. The top of the mug was also using some of the left-over pieces from the die cutting of the mug and the holder piece.
I wanted a snowflake background, so took a Simon Says Stamp embossing folder, and as I didn’t want it stark white, I ink blended the lighter purple Ditress Ink around the edges.
The background panel was glued directly onto the card base, and the mug attached with 3D foam.
I found some purple sequins and dotted them around as you see.
I shall be entering the following challenges:
Allsorts – anything goes, option to make your own background taken
Hello. A chance to play today to create this card:
The die cuts on this card are from Spellbinder – a mix of different die sets – with card stock from Concord & 9th.
I used an embossing folder on a panel for the background, and adhered that flat to the card base.
I then took some purple and pink Concord & 9th card colours, and a green Spellbinders card for all the floral and foliage and set to the die cutting. Once everything was die cut, I assembled the layers, then arranged – finally – as you see. This usually takes me a while, but once I am happy, I take a snap shot, then use glue or foam dots to stick them all down.
I have tried using Press’n’seal to pick everything up once arranged, but that never works out for me……
The sentiment is a foiled strip from a previous foiling session.
To finish the flowers, I added some gems to the centre, then also added some clear/iridescent gems near the bottom.
Hello once again. The Alphabet Challenge has reached the letter ‘U’, and Melanie has chosen the theme of ‘Under something‘. Think of under the sea, under the weather, under an umbrella etc. Here is my card:
I decided to break out several older products for this card.
The background blue piece is a water colour panel coloured with Brushos – I wet the piece down, sprinkled on the Brushos, move it around a little, then let it dry. I wanted a more even background colour with some darker little spots, and I also wanted the water colour card texture to come through too.
The images are from Lawn Fawn, coloured with Copics, then cut using the matching die set.
The sentiment is stamped onto the background panel instead of using a separate sentiment strip, to try and keep as much of the blue background as possible.
A little rainy and splashy scene with the cute Lawn Fawn images.
I hope you can come and join us with your creations following our theme. xx
Happy New Year to you all. Cardz 4 Galz has started the new year with a challenge theme chosen by Dawn W. – ‘On safari. Here is my card:
The die set of the elephants are from Altenew, and when I saw them just before Christmas – I just had to have them. Aren’t they cute?
I used a lighter grey and a darker grey for the layers, but added a little shading with Distress Inks to the larger elephant on the layers at the back – the legs and the body, just for a little more dimension.
Once the layers were glued together, and some black gel pen added for the eyes, I searched through my designer paper stash for a suitable background paper, and found this from Spellbinders with some faint little hearts.
I matted that layer with black and a gold layer, which I also die cut the sentiment and it’s shadow layer from. The sentiment is from the Spellbinders Advent Calendar.
The hardest part about this was the arrangement of the elephants, and after playing around a little I thought the three of them arranged like this – as though they were waling towards you to say hello – would work best.
I hope you can come and join us with your ‘safari’ themed projects. xx
I shall be entering the following challenges:
Ellibelle’s Corner – I Spy – something old and/or something new (new elephant die set, new sentiment die, old paper)
Happy New Year to you all. The ABC Christmas Challenge has started with their Christmas themed challenges. The first is A – anything goes Christmas, B – Berries. Here is my card:
So – pink………I know – but I love the way this looks…… I am not a pink girl in general, but I just thought I’d try this out.
The pink background is dry embossed using a Spellbinders embossing folder, then splattered with white and silver acrylic shimmer paint. Whilst this was drying, I die cut a previously created panel of green mica spray with the Hero Arts holly dies.
The holly was layered onto the pink background using glue for the bottom sprig, and 3D foam for the uppermost sprig.
For the berries, I chose some red sequins.
So many shimmer and shine elements, and then I added a foiled greeting strip too…
I hope you can come and join us with your Christmas/festive creations following out themes. xx